Contact us


All times are UTC - 8 hours



Post new topic Reply to topic  [ 5 posts ] 
Author Message
Offline Profile  


Joined: Wed Jan 16, 2008 11:02 pm
Posts: 2
I recently connected my project to Source Anywhere Hosted, and was successful using source code integration successfully until I shut down Visual Studio. Now when I open my solution inside of visual studio, the software appears to connect to each of the projects successfully, but then hangs with the message "Updating Source Code Control Status" in the status bar. There is no network activity (that I can tell), and the process is not consuming resources.

I'm on build 12046.


Offline Profile  


Joined: Tue Mar 08, 2005 12:23 am
Posts: 1315
For big solution, VS 6.0 may hang for a while to update source code control status. Did you wait long enough?

How many files are in your solution?

Thanks.

_________________
Catherine Sea
Dynamsoft Support Team
Follow us@Twitter, Facebook


Offline Profile  


Joined: Wed Jan 16, 2008 11:02 pm
Posts: 2
There are probably about 3000 files, and I waited over 24 hours.

It is of note that I had previously integrated with SourceAnywhere in this same workspace file (on a free account), then switched back to VisualStudio for a period of time. When I switched back to SourceAnywhere (this time with a paid account) was when the problem started occurring.

I think that I upgraded SourceAnywhere during that hiatus as well.

Thanks,
Kevin


Offline Profile  


Joined: Fri Feb 25, 2011 4:48 pm
Posts: 1
http://www.codeproject.com/Questions/11 ... mostrecent
YaY! YOU FRIGGIN ROCK! Thank you so much! You dont know how bad this was affecting my work!

Because you helped me so much, I'm gonna return the favor and help those who dont know how to update the hosts file.

We have Visual Source Safe 2006 and Visual Studio 2008.
Our VSS database is on a network drive.

Step 1 - Determine which server\computer the VSS Database is on:
In Visual Studio 2008 select File->Source Control->Change Source Control. Note the "Server Name". You're only interested in the server name which is the value between the beginning back slashes and the next backslash. In my case it is dddmisfile
\\dddmisfile\vssdatabase\FocusDD
Step 2 - Determine the ip address of the server: Open a Command Prompt (start->Run type cmd and press enter) and ping your server name (type ping YOURSERVERNAME in the command prompt box). I typed ping dddmisfile and this is what I got:
c:\>ping dddmisfile

Pinging dddmisfile.azdes.gov [10.104.49.10] with 32 bytes of data:

Reply from 10.104.49.10: bytes=32 time=-52ms TTL=128
Reply from 10.104.49.10: bytes=32 time=-52ms TTL=128
Reply from 10.104.49.10: bytes=32 time<1ms TTL=128
Reply from 10.104.49.10: bytes=32 time<1ms TTL=128

Ping statistics for 10.104.49.10:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = -52ms, Average = 1073741798ms
The IP Address you are interested in is the one that follows Reply from
In My case its 10.104.49.10

You're also interested in the fully qualified domain name: which is the name of the server with the domain appended to it. In My case its dddmisfile.azdes.gov

Step 3 - Add a line to your hosts file with any text editor Open the file with notepad. Type this in the run box (Start->Run)
C:\WINDOWS\NOTEPAD.EXE C:\WINDOWS\SYSTEM32\DRIVERS\etc\HOSTS
This is what I see before I modify it:
# Copyright (c) 1993-1999 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host

127.0.0.1 localhost
To add your server name to this list, simply add a new line and type the ip address then press tab then the fully qualified domain name:
10.104.49.10 dddmisfile.azdes.gov
Thats it! Close Notepad and you're done! Dont even need to reboot!
Dont for get to save your changes!


Offline Profile  


Joined: Tue Mar 08, 2005 12:23 am
Posts: 1315
Thanks very much for sharing the info, dogle.

_________________
Catherine Sea
Dynamsoft Support Team
Follow us@Twitter, Facebook


Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ]  Moderators: Robert, Catherine


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
cron
Copyright © 2016 Dynamsoft | All Rights Reserved
dynamic designed by Dynamsoft team